FIXYARD | Documentary

-

In India upcoming generations are very curious about Entrepreneurship.


The wish of such Young Talents due to the positive motive towards this Insane sector faced so many challenges at the beginning. Frustrated with the Robotic culture of employment, As a result came out with a Massive force inclusive ideas for revolutionary world expectations.
Here begins a Term FixYard before you.

 

Young engineers from various specializations united to bring and build this Organization to solve the major and irritating problem that every common people are facing. That's nothing but the service of your beloved Automobiles in our Home. These people have a different ideology that makes them unique from a present market scenario.



By their strategy, at earlier days itself they were recognized by #TheHindu newspaper.



Later their growth started not only in minds, But of course on streets. Sponsored the Soccer match @T.Nagar


Taking unemployment as a issue, started offering oppurtunitiesin various fields in Fixyard.


Knowing, diagnosing each and every segment of Automobile, clean and clear view on what they focused have been kept in paper. Then emerged as FIXYARD TECHNOLOGY SOLUTIONS PVT LTD.
A simple theory behind them. A thought which frustrate public should be removed by their ideas. And it happened.
Today a dominant number of customers are expressing their satisfaction with #FixYard in Chennai.
Cheers up to this Team. 


Ultimately your automobile family care takers are here.
No worries. Just believe them and contact these folks for the experiance:



Location: Chennai, Tamil Nadu, India

Comments

Post a Comment

Popular posts from this blog

Meaning of 1.2L, 1.4L, 1.6L,engine in a car?

-
Image
In a car, which has a multi(4/6/8) cylinder engine, the above nomenclature viz. 1.6L,1.4L, etc. refers to the combined volume capacity of all the cylinders( expressed in cubic centimeters, 1L=1000 cc).  Here volume capacity refers to the swept volume or displacement volume or breathing capacity of the cylinder. It is basically the volume of air that can be sucked insde the cylinder as the stroke moves from TDC to BDC. Swept Volume,  V= pi/4*d^2*L*K   , where                                            d- Bore, L-Stroke,  K-no. of cylinders. This is the common terminology used to specify the engine size. A 1.2L engine means a 1.2 litre engine, which is equal to 1200cc (cc = cubic capacity).  Hope that explains it! Pros/Cons: Usually, higher swept volume means higher power and subsequently higher fuel consumption. This is because Power, P= Mean Cyl.Pressure*Stroke*Pisto n area*No. of power strokes*No. of cylinders.  So, Power generated is a directly proportional to the cyl
Read more

Difference between a muffler and a catalytic converter

-
Image
A muffler makes the  car  quiet, the cat makes the exhaust clean. Cars built after 1974 originally had both, but it's legal to run with no muffler as long as the car isn't too loud. The cat is required, you can't pass emissions without one. Some people will remove the cat, if they live in a county without  emissions testing , but that is illegal. If you have a car with no  catalytic converter , and the muffler goes bad, sure you could put a cat on instead. They're more expensive, and louder, but that would get you legal. Actually, the cat is supposed to be mounted closer to the engine, where there is more exhaust heat to burn off exhaust crud. I suppose if you wanted to, you could run two catalytic converters. That would greatly restrict your exhaust and cut down on horsepower, probably reduce fuel economy as well. Probably wouldn't help emissions, either. hey are two totally different things,each with it's own  seperate purpose. You could put 2 co
Read more

Nitrox suspension - Gas charged suspensions

-
Image
The advantages of using a Nitrox suspension - Gas charged suspensions. The rear shock absorbers on current Bajaj Pulsar series bikes are also popularly known as NITROX shock absorbers . These types of shock absorbers are actually called as ‘Gas Filled Shock Absorbers’. The visual differentiation between a conventional shock absorber and a gas filled shock absorber is a small canister (box) which is attached on one side of it. This canister holds a small amount of Nitrogen gas in it. Hence these hydraulic shock absorbers or dampers are called as gas filled shock absorbers. So what is the reason to use a gas filled hydraulic dampers instead of using a conventional one? we'll find out the answer here. The 'Royal Enfield - Bullet Electra' was the first bike in India to have this feature. The Pulsar 150/180 UG II (2’nd upgrade) then became the second model (and the first in the 150 cc and above category) to make this feature available on Indian bikes. A
Read more